17
мар
Make sure to click 'Download twrp-3.1.0-0-i9100.img' to download the actual file. They also offer an md5 checksum, which you can use to check if the TWRP file is corrupt or not, but this isn't needed. Now we need to download the Android platform tools. Finally the wait is over! Most awaited update of Jelly Bean is now officially available for Samsung Galaxy S2 I9100 smartphone in the form of XXLS8 firmware. Though the update is pushed lately, you shouldn’t get disappointed as Samsung has released Android 4.1.2 instead of Android 4.1.1 version. You should feel proud being a Galaxy S2 user.
This guide is provided for information only. Download spanduk sekolah gratis file cdr disini images of. I will not be held responsible if you cause any damage, software or hardware, to your phone by following the guide. You are choosing to follow this guide, and as such, you choose to accept any responsibility for any mishap that may occur. WARNING: Do not follow this guide if you think (or even suspect) that your USB port may be faulty in any way (ie, slow charging, loose connection among other faults). If your USB port is faulty, it must be fixed before flashing, or you are in danger of hard-bricking your phone. If the connection to the computer fails even for a moment, at best the flash will fail, and at worst the phone will need a new motherboard. Either send it to a service centre, or is a good place to start if you want to DIY.
WARNING #2: If at all possible, make sure you have a backup of your efs folder (using Hellcat's app, 'kTool' from playstore). Windows installer download. Efs is the folder which contains your imei. No imei =no signal.
Flashing a ROM may corrupt the efs folder, in which case the backup will be invaluable. If you do not have a working backup of your efs folder, I am not responsible if you choose to follow this guide and your efs becomes corrupt. Symptoms This guide is for people who find themselves in the situation where: • The phone currently will not boot. • The phone can only enter download mode (If it can’t do that, see the section below.) • If, for whatever reason, an Odin flash fails. • It assumes you know the basics of Odin flashing.
If not, see No download mode? If your phone won’t enter download mode, you can try three things: • A USB jig. Don’t pin your hopes on this, they rarely succeed in this scenario. • ‘Jump starting’ – You might need someone else to give you a hand for this. Take the battery out of your phone and wait 30 seconds. Now, press the button combination to enter download mode, and with this combination still depressed, get someone to put the battery back in. Hopefully this will jolt your phone into download mode.
• Take out the phone battery, and re-insert it, but don’t turn the phone on. Now, plug in the charger while holding the volume down button. Keep holding volume down till you enter download mode. If your phone won’t enter download mode, and will do nothing but get hot when you attempt to do anything to it (charge it, turn it on), then your motherboard is in need of replacement. Your options I’ve seen a lot of people, when their Odin flash fails, either: • Give up.
Not a good option. • Flash a.pit file. That should be used as an absolute last resort. There’s a lot to try before getting to that stage! If a flash of a.pit file fails in Odin, your phone is well and truly unrecoverable, and you will need a motherboard (MB) replacement.
• Send their phone to a service centre. That costs money (& you’re without a phone for a week or so). • Read on and hopefully you will be able to recover your phone without spending anything. What to do Keep flashing via Odin.
You don't really have a choice. As for the files to flash: It’s worth trying to flash a range of stock ROM’s and custom kernels. I recommend downloading a stock firmware from Samfirmware for your device; either ICS 4.0.3 or JB 4.1.2.
Stay away from 4.0.4 (research emmc brickbug if you’re interested.) See here for the Alternatively you can also download firmwares from Make sure you’re using the correct firmware for your device variant and region (i9100, i9100g, i9100p etc). As for custom kernels: If you manage to flash a custom kernel onto your phone, that gives you recovery (usually CWM for i9100), from which you can either restore a nandroid backup, or flash a custom ROM.
ONLY for i9100: See here for If you were previously on ICS, flash ‘siyahkernel s2-v5.01’ from that link. If you were previously on JB stock, flash the ‘S2-v6.0beta5’.
You want the.tar extension in both cases. If you were on a 4.2.2 or 4.3/4.3.1 ROM, see You want the file called 'Kernel_Dorimanx-V9.43-[12-16]-[24-10]-TAR-FOR-ODIN.tar'. None of the other files downloadable from that mirror are Odin-flashable. All files linked are for international I9100. Even still: Your best bet is to continue to attempt to flash Stock ROMs for your model variant and region.
Make sure to click \'Download twrp-3.1.0-0-i9100.img\' to download the actual file. They also offer an md5 checksum, which you can use to check if the TWRP file is corrupt or not, but this isn\'t needed. Now we need to download the Android platform tools. Finally the wait is over! Most awaited update of Jelly Bean is now officially available for Samsung Galaxy S2 I9100 smartphone in the form of XXLS8 firmware. Though the update is pushed lately, you shouldn’t get disappointed as Samsung has released Android 4.1.2 instead of Android 4.1.1 version. You should feel proud being a Galaxy S2 user.
This guide is provided for information only. Download spanduk sekolah gratis file cdr disini images of. I will not be held responsible if you cause any damage, software or hardware, to your phone by following the guide. You are choosing to follow this guide, and as such, you choose to accept any responsibility for any mishap that may occur. WARNING: Do not follow this guide if you think (or even suspect) that your USB port may be faulty in any way (ie, slow charging, loose connection among other faults). If your USB port is faulty, it must be fixed before flashing, or you are in danger of hard-bricking your phone. If the connection to the computer fails even for a moment, at best the flash will fail, and at worst the phone will need a new motherboard. Either send it to a service centre, or is a good place to start if you want to DIY.
WARNING #2: If at all possible, make sure you have a backup of your efs folder (using Hellcat\'s app, \'kTool\' from playstore). Windows installer download. Efs is the folder which contains your imei. No imei =no signal.
Flashing a ROM may corrupt the efs folder, in which case the backup will be invaluable. If you do not have a working backup of your efs folder, I am not responsible if you choose to follow this guide and your efs becomes corrupt. Symptoms This guide is for people who find themselves in the situation where: • The phone currently will not boot. • The phone can only enter download mode (If it can’t do that, see the section below.) • If, for whatever reason, an Odin flash fails. • It assumes you know the basics of Odin flashing.
If not, see No download mode? If your phone won’t enter download mode, you can try three things: • A USB jig. Don’t pin your hopes on this, they rarely succeed in this scenario. • ‘Jump starting’ – You might need someone else to give you a hand for this. Take the battery out of your phone and wait 30 seconds. Now, press the button combination to enter download mode, and with this combination still depressed, get someone to put the battery back in. Hopefully this will jolt your phone into download mode.
• Take out the phone battery, and re-insert it, but don’t turn the phone on. Now, plug in the charger while holding the volume down button. Keep holding volume down till you enter download mode. If your phone won’t enter download mode, and will do nothing but get hot when you attempt to do anything to it (charge it, turn it on), then your motherboard is in need of replacement. Your options I’ve seen a lot of people, when their Odin flash fails, either: • Give up.
Not a good option. • Flash a.pit file. That should be used as an absolute last resort. There’s a lot to try before getting to that stage! If a flash of a.pit file fails in Odin, your phone is well and truly unrecoverable, and you will need a motherboard (MB) replacement.
• Send their phone to a service centre. That costs money (& you’re without a phone for a week or so). • Read on and hopefully you will be able to recover your phone without spending anything. What to do Keep flashing via Odin.
You don\'t really have a choice. As for the files to flash: It’s worth trying to flash a range of stock ROM’s and custom kernels. I recommend downloading a stock firmware from Samfirmware for your device; either ICS 4.0.3 or JB 4.1.2.
Stay away from 4.0.4 (research emmc brickbug if you’re interested.) See here for the Alternatively you can also download firmwares from Make sure you’re using the correct firmware for your device variant and region (i9100, i9100g, i9100p etc). As for custom kernels: If you manage to flash a custom kernel onto your phone, that gives you recovery (usually CWM for i9100), from which you can either restore a nandroid backup, or flash a custom ROM.
ONLY for i9100: See here for If you were previously on ICS, flash ‘siyahkernel s2-v5.01’ from that link. If you were previously on JB stock, flash the ‘S2-v6.0beta5’.
You want the.tar extension in both cases. If you were on a 4.2.2 or 4.3/4.3.1 ROM, see You want the file called \'Kernel_Dorimanx-V9.43-[12-16]-[24-10]-TAR-FOR-ODIN.tar\'. None of the other files downloadable from that mirror are Odin-flashable. All files linked are for international I9100. Even still: Your best bet is to continue to attempt to flash Stock ROMs for your model variant and region.
...'>I9100 Efs Tar Md5 Windows7(17.03.2019)Make sure to click \'Download twrp-3.1.0-0-i9100.img\' to download the actual file. They also offer an md5 checksum, which you can use to check if the TWRP file is corrupt or not, but this isn\'t needed. Now we need to download the Android platform tools. Finally the wait is over! Most awaited update of Jelly Bean is now officially available for Samsung Galaxy S2 I9100 smartphone in the form of XXLS8 firmware. Though the update is pushed lately, you shouldn’t get disappointed as Samsung has released Android 4.1.2 instead of Android 4.1.1 version. You should feel proud being a Galaxy S2 user.
This guide is provided for information only. Download spanduk sekolah gratis file cdr disini images of. I will not be held responsible if you cause any damage, software or hardware, to your phone by following the guide. You are choosing to follow this guide, and as such, you choose to accept any responsibility for any mishap that may occur. WARNING: Do not follow this guide if you think (or even suspect) that your USB port may be faulty in any way (ie, slow charging, loose connection among other faults). If your USB port is faulty, it must be fixed before flashing, or you are in danger of hard-bricking your phone. If the connection to the computer fails even for a moment, at best the flash will fail, and at worst the phone will need a new motherboard. Either send it to a service centre, or is a good place to start if you want to DIY.
WARNING #2: If at all possible, make sure you have a backup of your efs folder (using Hellcat\'s app, \'kTool\' from playstore). Windows installer download. Efs is the folder which contains your imei. No imei =no signal.
Flashing a ROM may corrupt the efs folder, in which case the backup will be invaluable. If you do not have a working backup of your efs folder, I am not responsible if you choose to follow this guide and your efs becomes corrupt. Symptoms This guide is for people who find themselves in the situation where: • The phone currently will not boot. • The phone can only enter download mode (If it can’t do that, see the section below.) • If, for whatever reason, an Odin flash fails. • It assumes you know the basics of Odin flashing.
If not, see No download mode? If your phone won’t enter download mode, you can try three things: • A USB jig. Don’t pin your hopes on this, they rarely succeed in this scenario. • ‘Jump starting’ – You might need someone else to give you a hand for this. Take the battery out of your phone and wait 30 seconds. Now, press the button combination to enter download mode, and with this combination still depressed, get someone to put the battery back in. Hopefully this will jolt your phone into download mode.
• Take out the phone battery, and re-insert it, but don’t turn the phone on. Now, plug in the charger while holding the volume down button. Keep holding volume down till you enter download mode. If your phone won’t enter download mode, and will do nothing but get hot when you attempt to do anything to it (charge it, turn it on), then your motherboard is in need of replacement. Your options I’ve seen a lot of people, when their Odin flash fails, either: • Give up.
Not a good option. • Flash a.pit file. That should be used as an absolute last resort. There’s a lot to try before getting to that stage! If a flash of a.pit file fails in Odin, your phone is well and truly unrecoverable, and you will need a motherboard (MB) replacement.
• Send their phone to a service centre. That costs money (& you’re without a phone for a week or so). • Read on and hopefully you will be able to recover your phone without spending anything. What to do Keep flashing via Odin.
You don\'t really have a choice. As for the files to flash: It’s worth trying to flash a range of stock ROM’s and custom kernels. I recommend downloading a stock firmware from Samfirmware for your device; either ICS 4.0.3 or JB 4.1.2.
Stay away from 4.0.4 (research emmc brickbug if you’re interested.) See here for the Alternatively you can also download firmwares from Make sure you’re using the correct firmware for your device variant and region (i9100, i9100g, i9100p etc). As for custom kernels: If you manage to flash a custom kernel onto your phone, that gives you recovery (usually CWM for i9100), from which you can either restore a nandroid backup, or flash a custom ROM.
ONLY for i9100: See here for If you were previously on ICS, flash ‘siyahkernel s2-v5.01’ from that link. If you were previously on JB stock, flash the ‘S2-v6.0beta5’.
You want the.tar extension in both cases. If you were on a 4.2.2 or 4.3/4.3.1 ROM, see You want the file called \'Kernel_Dorimanx-V9.43-[12-16]-[24-10]-TAR-FOR-ODIN.tar\'. None of the other files downloadable from that mirror are Odin-flashable. All files linked are for international I9100. Even still: Your best bet is to continue to attempt to flash Stock ROMs for your model variant and region.
...'>I9100 Efs Tar Md5 Windows7(17.03.2019)